Hyundai Tucson: Blind-Spot Collision Warning (BCW) / Blind-Spot Collision Warning Settings

Blind-Spot Safety

With the ignition switch ON, go to User Settings > Driver Assistance > Blind- Spot Safety (for cluster type) or Setup > Vehicle > Driver Assistance > Blind-Spot Safety (for infotainment system type) from the Settings menu to select the following:

If you change the setting from Off to Warning Only, the warning lights on the side view mirrors blink for three seconds.

In addition, if the engine is turned on when the function is set to Warning Only, the warning lights on the side view mirrors blink for three seconds.

When the engine is restarted with the function off, the "Blind-Spot Safety is Off" message may appear on the instrument cluster.

WARNING

If Off is selected, the function does NOT warn you to help avoid a collision.

Information

When the engine is restarted, Blind- Spot Collision Warning maintains its last setting.

Information

You can change the Warning Timing and Warning Volume settings or select Driving Safety Priority for Blind-Spot Collision Warning from the Settings menu. For more information, refer to the "Driver Assistance System Settings" section in this chapter.

Blind-Spot Collision Warning (BCW)
Blind-Spot Collision Warning uses the rear corner radar to help detect approaching vehicles in the driver’s blind spot areas and warn you of a possible collision with a warning message and ...

Blind-Spot Collision Warning Operation
Vehicle detection When a vehicle is detected in a blind spot, the warning light on the side view mirror illuminates. Blind-Spot Collision Warning operates when your vehicle speed is abov ...

Other information:

Hyundai Tucson (NX4) 2022-2023 Owner's Manual: Highway Driving Assist Settings
Highway Driving Assist With the ignition switch ON, go to Setup > Vehicle > Driver Assistance > Driving Convenience > Highway Driving Assist (for infotainment system type) from the Settings menu to turn Highway Driving Assist on and off. If Highway Driving Assist is sele ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: Hazard warning flasher
The Hazard Warning Flasher should be used whenever you find it necessary to stop the car in a hazardous location. When you must make such an emergency stop, always pull off the road as far as possible. The hazard warning lights are turned on and off by pushing in the hazard switch. This c ...

© 2010-2023 www.htmanual.net