Hyundai Tucson: Before Using Driver Assistance System / Driver Assistance System Settings

Warning Timing

With the ignition switch ON, go to User Settings > Driver Assistance > Warning Timing (for cluster type) or Setup > Vehicle > Driver Assistance > Warning Timing (for infotainment system type) from the Settings menu to change the initial warning activation time. Warning Timing is set to Normal at the factory.

If you change the Warning Timing, the warning time for Forward Collision– Avoidance Assist, Blind-Spot Collision- Avoidance Assist, Driver Attention Warning, and Rear Cross-Traffic Collision-Avoidance Assist are changed.

WARNING

Information

When the engine is restarted, the Warning Timing maintains its last setting.

Before Using Driver Assistance System
WARNING Always maintain a safe distance from the vehicles ahead and adjust your vehicle speed to the road conditions. Driver Assistance system may not operate in all situations and cannot avo ...

Warning Volume
With the ignition switch ON, the Warning Volume can be adjusted from the Settings menu in the instrument cluster or infotainment system. Select: User Settings > Driver Assistance > ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Front Hub / Knuckle / Tone Wheel Repair procedures
Removal 1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)     Be careful not to damage to the hub bolts when removing the front wheel and tire (A). 2. Remove the brake caliper mounting ...

Hyundai Tucson (LM) 2010-2015 Service Manual: DBC Switch Repair procedures
Inspection 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad side switch assembly. (Refer to Body - "Crash Pad") 3. Check the continuity between the switch terminals as the DBC switch is engaged. ...

© 2010-2023 www.htmanual.net