Hyundai Tucson: Heating and Air Conditioning / Fan speed control & Air conditioning (A/C)

Fan speed control

Turn the knob to the right to increase the fan speed and airflow. Turn the knob to the left to decrease fan speed and airflow.

Setting the fan speed control knob to the “0” position turns off the fan.

Information

Operating the fan speed when the ignition switch is in the ON position may cause the battery to discharge.

Air conditioning (A/C)

Press the A/C button to turn on the air conditioning system (indicator light ON). Press the button again to turn off the air conditioning system.

Temperature & Air intake control
Temperature control The temperature increases by turning the knob to the right. The temperature decreases by turning the knob to the left. Air intake control To select outside (fresh) air or ...

System Operation
Ventilation 1. Set the mode to the position. 2. Set the air intake control to the outside (fresh) air position. 3. Set the temperature control to the desired position. 4. Set the fan speed co ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Cylinder Head Repair procedures
Removal Engine removal is not required for this procedure.     • Use fender covers to avoid damaging painted surfaces. • To avoid damaging the cylinder head, wait until the engine coolant temperature drops below normal temperature (20°C [68°F]) before removin ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Input Speed Sensor Description and Operation
Description Input Speed Sensor is a vital unit that measures the rate of rotation of the input shaft inside the transmission and delivers the readings to the TCM. The sensor provides critical input data that's used in feedback control, damper clutch control, gear setting cont ...

© 2010-2023 www.htmanual.net