The driver’s and front passenger’s seats are equipped with adjustable head restraint for the passengers safety and comfort.
Adjusting the height up and down
To raise the head restraint:
1. Pull it up to the desired position 1.
To lower the head restraint:
1. Press and hold the release button 2 on the head restraint support.
2. Lower the head restraint to the desired position 3.
Removal/Reinstallation
To remove the head restraint:
1. Recline the seatback 2 with the seatback angle lever or switch 1. 2. Raise the head restraint as far as it can go.
3. Press the head restraint release button 3 while pulling the head restraint up 4.
WARNING
Never allow anyone to travel in a seat with the head restraint removed.
To reinstall the head restraint:
1. Recline the seatback.
2. Put the head restraint poles 2 into the holes while pressing the release button 1.
3. Adjust the head restraint to the appropriate height.
4. Return the seatback 4 with the seatback angle lever or switch 3.
WARNING
Always make sure the head restraint is locked in place and properly adjusted for the passenger.
Hyundai Tucson (LM) 2010-2015 Service Manual: Camshaft Position Sensor (CMPS) Repair procedures
Inspection
1.
Check the signal waveform of the CMPS and CKPS using the GDS.
Specification: Refer to “Wave Form”
Removal
•
DON’T remove the camshaft position sensor while the engine
is running or right after engine is turned off. The part and engine ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Description and Operation
Warning Lamp Activation
Warning Lamp Behavior after Ignition On
As soon as the operating voltage is applied to the SRSCM
ignition input, the SRSCM activates the warning lamp for a LED lamp
check.
The lamp shall turn on for 6 seconds during the initialization phase and be turned off afterw ...