Hyundai Tucson: Engine Control / Fuel System / Fuel Delivery System
- Components and Components Location
- Repair procedures
- Fuel Tank Repair procedures
- Fuel Pump Repair procedures
- Filler-Neck Assembly Repair procedures
- Accelerator Pedal Repair procedures
- Delivery Pipe Repair procedures
- High Pressure Fuel Pump Repair procedures
Canister Close Valve (CCV) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the CCV connector.
3.
Measure resistance between the CCV terminal 1 and 2.
4.
Check that the resistance is within the specific ...
Components and Components Location
Components Location
1. Fuel tank2. Fuel pump3. Fuel filter4. Fuel pressure regulator5. Canister6. Fuel tank air filter7. Fuel tank band8. Fuel tank pressure sensor (FTPS) 9. Canister close valve ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Purge Control Solenoid Valve (PCSV) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the PCSV connector.
3.
Measure resistance between the PCSV terminals 1 and 2.
4.
Check that the resistance is within the specification.
Specification: Refer to “Specification”
Removal
1.
Turn the ignition switc ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Front Driveshaft Components and Components Location
Components
[THETA II 2.4 2WD]
1. Driveshaft (LH)2. Driveshaft (RH)
[NU 2.0 / THETA II 2.4 4WD]
1. Driveshaft (LH)2. Inner shaft bearing bracket3. Driveshaft (RH)
Components
[LH]
1. BJ assembly2. Clip 3. BJ boot band4. BJ boot5. Dynamic damper band6. Dynamic damper7. Shaft8. ...