A vehicle’s electrical system is protected from electrical overload damage by fuses.
This vehicle has 2 (or 3) fuse panels, one located in the driver’s side panel bolster, the other in the engine compartment. If any of your vehicle’s lights,
accessories, or controls do not work, check the appropriate circuit fuse. If a fuse has blown, the element inside the fuse is melted or broken.
If the electrical system does not work, first check the driver’s side fuse panel. Before replacing a blown fuse, turn off the engine and all switches, and then disconnect the negative battery cable. Always replace a blown fuse with one of the same rating.
If the replacement fuse blows, this indicates an electrical problem. Avoid using the system involved and contact an authorized HYUNDAI dealer.
WARNING
Never replace a fuse with anything but another fuse of the same rating.
NOTICE
Do not use a screwdriver or any other metal object to remove fuses because it may cause a short circuit and damage the system.
Hyundai Tucson (LM) 2010-2015 Owners Manual: Pairing through [PHONE] Setup
Press the key
Select [Phone]
Select [Pair Phone]
Select
TUNE knob
1. The following steps are the same as those described in the section "When No
Devices have been Paired" on the previous page.
✽ NOTICE
Bluetooth® Wireless Technology features supported within the vehicle
are ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Fuel Tank Pressure Sensor (FTPS) Schematic Diagrams
Circuit Diagram
(M/T)
(A/T)
...