High Beam Assist automatically adjusts the headlights between high beam and low beam depending on the light detected from oncoming vehicles or vehicles in front using the front view camera.
Information
Refer to the "Driver Assistance Sensors" section in Chapter 7 for the location and the general precautions of front view camera.
High Beam Assist Settings
With the ignition switch ON, go to the Settings menu to turn on High Beam Assist and deselect to turn off the function in the instrument cluster or infotainment system.
Select:
WARNING
Only change the settings after parking your vehicle at a safe location.
High Beam Assist Operation
Information
The images and colors in the instrument cluster may differ depending on the cluster type or theme selected from the settings menu.
Hyundai Tucson (LM) 2010-2015 Service Manual: Steering Column and Shaft Repair procedures
Replacement
1.
Disconnect the battery negative cable from the battery and then wait for at least 30 seconds.
2.
Turn the steering wheel so that the front wheels can face straight ahead.
3.
Remove the airbag module (A).
(Refer to Restraint - "Airbag Module")
4.
Disconnect the connect ...
Hyundai Tucson (NX4) 2022-2023 Owner's Manual: How does the Airbag System
Operate?
The SRSCM (Supplemental Restraint
System Control Module) continually
monitors all SRS components while the
ignition switch is ON to determine if a
crash impact is severe enough to require
airbag deployment or pretensioner seat
belt deployment.
During a moderate to severe frontal
colli ...