Hyundai Tucson: Body Electrical System / Indicators And Gauges
- Components and Components Location
- Instrument Cluster Components and Components Location
- Instrument Cluster Schematic Diagrams
- Instrument Cluster Description and Operation
- Instrument Cluster Repair procedures
- Troubleshooting
PDM Relay Box Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front seat heater switch.
(Refer to BE group - "Seat heater switch")
3.
Remove the PDM relay box (A) after loose ...
Components and Components Location
Component Location
1. Cluster assembly2. Seat belt switch3. Vehicle speed sensor4. Engine coolant temperature sender5. Oil pressure switch6. Brake fluid level warning switch7. Parking brake switc ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Body Control Module (BCM) Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the center facia panel.
(Refer to BD group - "Crash pad center panel")
3.
Loosen the nut and bolt from BCM.
4.
Disconnect the connectors (A).
Installation
1.
Install the BCM and connect the connectors.
2.
In ...
Hyundai Tucson (LM) 2010-2015 Owners Manual: Reprogramming a single HomeLink® button
To program a new device to a previously trained HomeLink® button, follow these
steps:
1. Press and hold the desired HomeLink® button. Do NOT release until step 4 has
been completed.
2. When the indicator light begins to flash slowly (after 20 seconds), position
the handheld transmitter 1 t ...