Hyundai Tucson: If You Have a Flat Tire / Jack Label
.png)
The actual jack label in the vehicle may differ from the illustration.
For more detailed specifications, refer to the label attached to the jack.
1. Model Name
2. Maximum allowable load
3. Always apply the parking brake before using a jack.
4. Always turn off the engine before using a jack.
5. Never put any portion of your body under the vehicle supported by a jack.
6. Only use the designated jacking locations on the frame.
7. When supporting the vehicle, have the base plate of the jack flat on the
ground
under the lifting point.
8. Shift to the P (Park) position with the automatic transmission.
9. Do not jack the vehicle on an incline. Only jack the vehicle on a firm level
ground.
10. Jack manufacturer
11. Production date
12. Representative company and address
Jack and Tools
1 Jack handle
2 Jack
3 Wheel nut wrench
The jack and wheel lug wrench are stored
in the luggage compartment under the
luggage box cover.
The jack is provided for emergency tire
changing ...
Changing Tires
WARNING
Because the vehicle may slip or roll off
of a jack causing serious injury or death,
take the following safety precautions:
• Never place any portion of your body
under the vehicl ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Schematic Diagrams
System Block Diagram
Component Parts And Function Outline
Component partFunctionVehicle-speed sensorConverts vehicle speed to pulse.ECMReceives signals from sensor and control switches.Cruise control indicatorIlluminate when CRUISE main switch is ON (Built into cluster)Cruise Control switchesON/ ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Rear Cross Member Repair procedures
Replacement
1.
Remove the rear wheel & tire.
Tightening torque :
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
Be careful not to damage to the hub bolts when removing the rear wheel & tire.
2.
Remove the parking brake cable.
(Refer to the BR ...
