Hyundai Tucson: Light Bulbs / License Plate Light Replacement

License plate light (Bulb type)

1. Using a flat-blade screwdriver, gently pry the lens cover from the lamp housing.

2. Remove the bulb by pulling it straight out.

3. Install a new bulb.

4. Reinstall in the reverse order.

License plate light (LED type)

If the LED light does not operate, contact an authorized HYUNDAI dealer for replacement.

The LED light cannot be replaced as a single unit. A skilled technician should check or repair the LED light, for it may damage related parts of the vehicle.

High Mounted Stop Light Replacement
If the LED light 1 does not operate, contact an authorized HYUNDAI dealer for replacement. The LED light cannot be replaced as a single unit. A skilled technician should check or repair the ...

Interior Light Replacement
Map lamp, Rear room lamp (LED type) If the LED light does not operate, contact an authorized HYUNDAI dealer for replacement. The LED light cannot be replaced as a single unit. A skilled te ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Engine Coolant Temperature Sensor (ECTS) Schematic Diagrams
Circuit Diagram (M/T) (A/T) ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Valve Body Repair procedures
Removal 1. Remove the air duct. (Refer to Engine Mechanical System - "Air cleaner") 2. Remove the battery and the battery tray. (Refer to Engine Electrical System - "Battery") 3. Remove the under cover (A). Tightening torque : 19.6 ~ 24.5 N.m (2.0 ~ 2.5 kgf.m, 14.5 ~ 18.1 lb-ft) ...

© 2010-2023 www.htmanual.net