Hyundai Tucson: Manual Heating and Air Conditioning / Mode selection

The mode selection button controls the direction of the air flow through the ventilation system.

The air flow outlet direction is cycled as follows:

Face-Level (B, C, E)

Air flow is directed toward the upper body and face. Additionally, each outlet can be controlled to direct the air discharged from the outlet.

Bi-Level (B, C, D, E, F)

Air flow is directed toward the face and the floor.

Floor-Level (A, B, D, E, F)

Most of the air flow is directed to the floor, with a small amount of the air being directed to the windshield and side window defrosters.

Floor/Defrost-Level (A, B, D, E, F)

Most of the air flow is directed to the floor and the windshield with a small amount directed to the side window defrosters.

Defrost-Level (A, B)

Most of the air flow is directed to the windshield with a small amount of air directed to the side window defrosters.

Multi air mode (B, C, D, E, F, G)

Gentle breezes come out from the outlet vents.

Instrument panel vents

Front

Rear

The instrument panel vent air flow can be directed up/down or left/right using the vent adjustment lever. The air flow can also be CLOSED using the vent adjustment lever.

Manual Heating and Air Conditioning
1. Start the engine. 2. Set the mode to the desired position. For improving the effectiveness of heating and cooling, select: - Heating: - Cooling: 3. Set the temperature control to the des ...

Temperature control
Type A Type B The temperature setting increases when you toggle up or press the UP arrow on the touchscreen (if equipped). The temperature setting decreases when you toggle down or press ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Components and Components Location
Component Location Engine Room 1. Condenser2. Receiver-drier 3. Compressor 4. Expansion Valve5. Service port (High)6. Service port (Low)7. A/C Pressure Transducer Interior ...

Hyundai Tucson (NX4) 2022-2023 Owner's Manual: Blind-Spot Collision-Avoidance Assist Settings
Blind-Spot Safety With the ignition switch ON, go to User Settings > Driver Assistance > Blind- Spot Safety (for cluster type) or Setup > Vehicle > Driver Assistance > Blind-Spot Safety (for infotainment system type) from the Settings menu to select the following: I ...

© 2010-2023 www.htmanual.net