Hyundai Tucson: Windows / Power Windows

The ignition switch must be in the ON position to be able to raise or lower the windows. Each door has a Power Window switch to control the door’s window. The driver has a Power Window Lock button that can block the operation of rear passenger windows. The power windows will operate for about 3 minutes after the ignition is turned OFF or if the ignition is placed in the ACC position, as long as the front doors remain closed.

If the front doors are opened, the battery power is turned OFF and the Power Windows do not operate.

Window opening and closing

To open:

Press the window switch down to the first detent position

Windows
1 Driver’s door power window switch 2 Front passenger’s door power window switch 3 Rear door (left) power window switch 4 Rear door (right) power window switch 5 Window opening and clo ...

Panoramic Sunroof
If your vehicle is equipped with a sunroof, you can slide or tilt your sunroof with the sunroof switch located on the overhead console. The sunroof can be operated when the ignition switch ...

Other information:

Hyundai Tucson (NX4) 2022-2023 Owner's Manual: Limitations of Forward Collision- Avoidance Assist
Forward Collision-Avoidance Assist may not operate normally or may operate unexpectedly if: The front view camera is blocked, covered, or damaged by snow, water, or dirt. The temperature near the front view camera is very hot or cold. The camera lens is covered or blocked by ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: Air intake control
The air intake control button is used to select the outside (fresh) air position or recirculated air position. To change the air intake control position, push the control button. Recirculated air position The indicator light on the button illuminates when the recirculated air position i ...

© 2010-2023 www.htmanual.net