Your HYUNDAI uses a remote key that is used to lock or unlock the driver’s and passenger’s doors or the rear liftgate.
1 Door Lock
2 Door Unlock
3 Liftgate Open (if equipped)
4 Panic
Locking your vehicle
1. Close all the doors, hood, and liftgate.
2. Press the Door Lock button 1 on the remote key. The doors are locked. The hazard warning lights blink.
3. Make sure the doors are locked by pulling the outside door handle.
WARNING
Do not leave the Remote Key in your vehicle with children that are unattended or unsupervised.
Children could unintentionally place the key in the ignition switch or operate the power windows and other controls, or even cause the vehicle to move, resulting in serious injury or death.
Unlocking your vehicle
Press the Door Unlock button 2 on the remote key. The doors are unlocked. The hazard warning lights blink two times.
Two press unlock setting
If you press the door unlock button on the remote key again within four seconds, then all the doors are unlocked. Two press unlock setting can be changed according to owner’s preference in the instrument cluster User Settings mode.
User settings mode method
You can activate or deactivate the Two Press Unlock feature from the Settings menu in the instrument cluster.
Select: User Settings > Door > Two Press Unlock
For more information, refer to the “Cluster Display” section in Chapter 4.
Information
After unlocking the doors, the doors are locked automatically after 30 seconds unless a door is opened.
Opening the liftgate
Press and hold the Liftgate Open button
Hyundai Tucson (NX4) 2022-2023 Owner's Manual: Mode selection
The mode selection button controls the direction of the air flow through the
ventilation
system.
The air flow outlet direction is cycled as
follows:
Face-Level (B, C, E)
Air flow is directed toward the upper
body and face. Additionally, each outlet
can be controlled to direct th ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Coolant Repair procedures
Refilling And Bleeding
Never remove the radiator cap when the engine is hot. Serious
scalding could be caused by hot fluid under high pressure escaping from
the radiator.
When pouring engine coolant, be sure to shut the relay box
lid and not to ...