Parking/View button
Press the Parking/View button 1 to turn on Surround View Monitor.
Press the button again to turn off the function.
Front view
The front view appears on the screen when the gear is in N (Neutral) or D (Drive) to assist parking. The front view has top view, front view, and side view.
View modes can be selected by pressing the view buttons 2 on the Surround View Monitor screen.
Turns on if:
Information
When the front view is turned on, the last view mode appears.
Turns off if:
Information
Surround View Monitor turns off if your vehicle speed is greater than 9 mph (15 km/h). Although you slow down to less than 9 mph (15 km/h) again, Surround View Monitor does not turn on again.
Rear view
The rear view appears on the screen when the gear is in R (Reverse) or P (Park) to assist parking. The rear view has top view, front view, and side view. View modes can be selected by pressing the view buttons 2 on the Surround View Monitor screen.
Turns on if:
Turns off if:
Information
The rear view cannot be turned off
when the gear is in R (Reverse) even if
the infotainment system buttons Hyundai Tucson (NX4) 2022-2023 Owner's Manual: Owner Maintenance Precautions Hyundai Tucson (LM) 2010-2015 Owners Manual: AUTO control (if equipped)
Camera settings
To change the settings of Surround View
Monitor's Display Contents or Display
Settings, press the setup icon ()
on
the screen while Rear View Monitor is
operating, or go t ...
Surround View Monitor Settings
Surround View Monitor malfunction
When Surround View Monitor is not
working properly, or the screen flickers,
or the camera image does not display
normally, have the vehicle inspected by
an a ...
Surround View Monitor
Malfunction and Limitations
Other information:
Inadequate, incomplete, or insufficient
servicing may result in operational
problems with your vehicle that could
cause vehicle damage or a collision that
results in serious injury or death.
Your vehicle must not be modified
in any way. Such modifications may
adversely affect the perfor ...
The rain sensor located on the upper end of the windshield glass senses the amount
of rainfall and controls the wiping cycle for the proper interval.
The more it rains, the faster the wiper operates. When the rain stops, the wiper
stops. To vary the speed setting, turn the speed control kno ...