Hyundai Tucson: Smart Cruise Control Operation / To temporarily accelerate
.png)
If you depress the accelerator pedal above a certain speed while Smart Cruise Control is operating, your vehicle can speed up temporarily without changing the set speed. The set speed, distance level, and target distance blink on the instrument cluster while depressing the accelerator pedal. Your vehicle speed may decrease if the accelerator pedal is not depressed far enough.
WARNING
Be careful when accelerating temporarily, because Smart Cruise Control is not controlling the speed and distance even if there is a vehicle in front of you.
Always maintain a safe distance from the vehicles ahead and adjust your vehicle speed depending on the road conditions.
Smart Cruise Control display
The status of the Smart Cruise Control
operation appears in Driving Assist mode
on the instrument cluster. Refer to the
"View Modes" section in Chapter 4.
When operating
1 Whether there is a ...
Smart Cruise Control temporarily
canceled
Smart Cruise Control is temporarily
canceled automatically when:
Your vehicle speed is over 120 mph
(190 km/h).
Your vehicle is stopped for a certain
period of time.
Your accelerator ...
Other information:
Hyundai Tucson (LM) 2010-2015 Owners Manual: Turn signal light
1. Remove the socket from the assembly by turning the socket counterclockwise
until the tabs on the socket align with the slots on the assembly.
2. Remove the bulb from the socket by pressing it in and rotating it counterclockwise
until the tabs on the bulb align with the slots in the socke ...
Hyundai Tucson (LM) 2010-2015 Owners Manual: Voice recognition
Using Voice Recognition
Starting Voice Recognition
Shortly press the key on the
steering wheel. Say a command.
If prompt feedback is in [ON], then the system will say “Please say a command
after the beep (BEEP)”
If prompt feedback is in [OFF] mode, then the system will only s ...
