Hyundai Tucson: Body (Interior and Exterior) / Exterior
- Fender Repair procedures
- Hood Repair procedures
- Tail Gate Repair procedures
- Front Door Components and Components Location
- Front Door Repair procedures
- Rear Door Components and Components Location
- Rear Door Repair procedures
- Body Side Moldings Repair procedures
- Panoramaroof Components and Components Location
- Panoramaroof Repair procedures
- Mirror Repair procedures
- Cowl Top Cover Repair procedures
Cross Member Body Repair
Front Cross Member
* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ]
Rear Cross Member
* These dimensions indicated in this figure are actu ...
Fender Repair procedures
Replacement
•
When removing and installing the hood, an assistant is necessary.
•
Be careful not to damage the hood and body.
•
When removing the clips, u ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: CVVT Oil Control Valve (OCV) Description and Operation
Description
Continuous Variable Valve Timing (CVVT) system advances or
retards the valve timing of the intake and exhaust valve in accordance
with the ECM control signal which is calculated by the engine speed and
load.
By controlling CVVT, the valve over-lap or under-lap occurs,
which m ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Repair procedures
On-vehicle Inspection
Inspect ignition coil assembly and Perform spark test
1.
Check for DTCs.
•
If a DTC is present, perform troubleshooting in accordance with the procedure for that DTC. (Refer to DTC guide)
2.
Check if sparks occur.
(1)
Remove the engi ...